How to Dismantle a Recliner Chair: A Step-by-Step Guide

how to dismantle a recliner chair

Last Updated on

Are you ready to take on the challenge of dismantling a recliner chair? It may seem like an intimidating task, but with the right tools and knowledge it can be done. We’ll walk you through each step, from gathering the necessary items to separating out the frame. So get comfortable – we’re about to embark on our journey of learning how to dismantle a recliner chair. Let’s go!

Table of Contents:

Gather the Right Tools

Are you planning to dismantle a recliner chair? Before you start, it’s important to make sure that you have the right tools for the job. Having the wrong tool can not only make the task more difficult, but it can also be dangerous.


A screwdriver is essential when dismantling a recliner chair as many of its components are held together with screws. Make sure that you have a variety of sizes and types on hand so that you can easily remove any screws without damaging them or your furniture. A Phillips head screwdriver is usually best for most jobs, but if your recliner has other types of screws, then make sure to get those too.


Pliers are another must-have tool when dismantling a recliner chair. They come in handy for removing staples from fabric upholstery and gripping small parts like springs or clips, which may need to be removed during disassembly. You’ll want both needle nose pliers and regular pliers in order to tackle all kinds of tasks while taking apart your furniture piece by piece.

Adjustable Wrench

An adjustable wrench is great for loosening nuts and bolts, which may be holding pieces together on your recliner chair frame or legs. This type of wrench allows you to adjust its size so that it fits perfectly around whatever nut or bolt needs loosening, making it easier than trying to use two different wrenches at once (which could damage the nut).

Once you have all the necessary tools, it’s time to move on to removing the cushions from your recliner chair.

Key Takeaway: When dismantling a recliner chair, make sure to have the right tools on hand, such as a screwdriver, pliers and an adjustable wrench. These three items should cover most scenarios but depending on the model additional items may be needed.

Remove the Cushions

a person removing the cushion

Before you can start taking apart the recliner chair frame, you’ll need to remove the cushions. This is usually a fairly straightforward process, but there are some important steps to take.

First, check for any hidden screws or clips that may be holding the cushion in place. These could be located under armrests or along seams of fabric on the back and sides of the chair. If you find any, use a screwdriver or other appropriate tool to loosen them before attempting to remove the cushion from its base.

Next, gently lift up one side of the cushion at a time and slide it off its base until it’s completely removed from your recliner chair frame. Depending on how long your cushions have been in place, they may require some extra force to get them off their bases – just make sure not to pull too hard, as this could damage both your furniture and yourself.

Finally, if necessary (depending on what type of recliner chair you have), disconnect any wires that may be attached between each cushion and its corresponding seatback/armrest before fully removing them from their frames. Once all connections are detached safely, carefully move each cushion away from your furniture so that they are out of harm’s way while you work on dismantling other parts of your recliner chair frame.

Once you have removed the cushions, you can move on to disconnecting the reclining mechanism.

Disconnect the Reclining Mechanism

Disconnecting the reclining mechanism from the frame of a chair can be an intimidating task. But with the right tools and knowledge, it doesn’t have to be. Before getting started, make sure you have a Phillips head screwdriver and any other necessary tools on hand.

a grey sofa

Start by removing all cushions from the chair. This will give you better access to the screws or bolts that hold the reclining mechanism in place. Once all cushions are removed, locate any screws or bolts that may be holding it in place and remove them using your Phillips head screwdriver. If there are no visible screws or bolts, use your hands to feel around for anything that might need unscrewing before attempting to disconnect it manually.

Once all screws or bolts have been removed, carefully pull apart each side of the frame until they separate completely from one another. Depending on how tight everything is held together, this could take some effort so proceed with caution. Make sure not to tug too hard as this could cause damage to both parts of the frame if done incorrectly.

Finally, once separated, gently lift out each part of the reclining mechanism from its respective side of the frame until it is free and clear from either end. You should now have two distinct pieces – one being just a regular chair without any moving parts and another containing only what was previously connected via screws or bolts (i.e., springs). Congratulations, you have successfully disconnected your recliner’s mechanisms.

Once the reclining mechanism has been disconnected, you can then move on to separating the frame of the chair.

Separate the Frame

Identifying the Frame Parts

The first step in separating the frame of a recliner chair is to identify all its component parts. Start by examining the backrest and armrests, which are typically held together with screws or bolts. If you can’t see any visible fasteners, look for small holes where they may be hidden. Once you’ve identified these components, it’s time to move on to the next step.

Removing Fasteners

Now that you know where all the screws and bolts are located, it’s time to remove them so that you can separate the frame into its individual pieces. Use an appropriate screwdriver or wrench depending on what type of fastener is used – Phillips head screws, require a Phillips head screwdriver while hexagonal bolts need a socket wrench. Be sure not to over-tighten as this could damage your furniture.

Separating Components

Once all fasteners have been removed, carefully pull apart each piece of furniture until they come away from one another easily without too much force being applied. This should leave you with four distinct components – two armrests, one backrest and one base – ready for reassembly if needed.

Finishing Up

Finally, make sure everything looks good before putting it back together again; check for any loose connections or broken parts that may need replacing before reassembling your recliner chair’s frame once more. With some patience and care, separating your recliner chair’s frame should not take too long.

FAQs in Relation to How to Dismantle a Recliner Chair

Do all recliner chairs come apart?

No, not all recliner chairs come apart. Some models are designed to be one piece and cannot be taken apart for storage or transport. Other models may have removable parts that can be detached from the main frame of the chair, but these are usually limited to cushions and armrests. If you’re looking for a recliner chair that is easy to move around or store away when not in use, it’s best to look for a model with removable parts or one specifically designed as such.

How do you take the back off a recliner?

Removing the back of a recliner can be done in just a few steps. Firstly, locate and remove any screws or bolts that are holding the back onto the frame. Once these have been removed, carefully lift up on the back until it comes off. If there is an additional locking mechanism, such as clips or latches, use a flathead screwdriver to release them before lifting off the back panel. Finally, take care when handling and storing the parts so they don’t get damaged or lost during reassembly.

How do you separate a 2-seater recliner?

Removing a two-seater recliner from its packaging or moving it to another location can be a daunting task. However, with the right tools and instructions, it is possible to do so safely and efficiently.


Learning how to dismantle a recliner chair may seem like an intimidating task, but with the right tools and knowledge it can be done in no time. With this guide, you now have all the information needed to successfully dismantle your recliner chair. So grab your tools and get started on taking apart that recliner chair. Just remember to take your time and be careful when dismantling a recliner chair – it’s not as hard as it looks.

Leave a Comment

Your email address will not be published. Required fields are marked *